Pro Tools 6.4
Pro Tools 6.4
Voila les nouveautés de Pro Tools 6.4:
* Automatic Delay Compensation (HD) -- Pro Tools now automatically compensates for inherent delay issues caused by plug-in latency, bussing, and routing within the Pro Tools mixer. It allows the user to take advantage of mixer configurations that were previously only possible with analog consoles, or with digital consoles many times the price of a Pro Tools environment.
* TrackPunch (HD) -- Allows Pro Tools to be used as a recorder on film stages, rather than only an editing/playback device. For music, TrackPunch enhances current QuickPunch capabilities for music recording by allowing the user to arm tracks on the fly. Operators can punch in and out of tracks by using individual track record buttons instead of one global command. Combined with TrackInput, TrackPunch allows workflows similar to traditional tape-based multi-track recorders.
* TrackInput (HD) -- Allows per-track switching between input source and playback from disk.
* 23.976 fps support (HD, LE with DV Toolkit option) -- Enables post customers who work with high-definition video to use a new frame rate specific to the medium, facilitating proper synchronization to the source. Pro Tools now offers complete recall of all editing, processing, mixing console, and machine control parameters while working entirely within the new 24 and 23.976 frame rates required for high-definition video production.
* +12 dB (over 0 dBfs) fader gain (HD, LE) -- Gives the user more latitude while mixing than with the previous +6 dB (over 0 dBfs); particularly useful when balancing recordings made at lower levels. With a new taper above 0 dB, the faders also have a more familiar "console" feel.
* RecordLock (HD) -- Loading audio with discontiguous ("broken") time code means that an assistant no longer has to continually re-arm Pro Tools when loading in different takes from film shoots. This also prevents missed record takes on shooting stages, where the distributed time code stops and starts between takes.
* Hierarchical plug-in menus, organized by plug-in category (HD, LE) -- Minimizes mousing and searching for the right plug-ins.
* Track Position Numbers (HD, LE) -- Gives each track a fixed sequential number, enabling operators to better organize their sessions, as well as to quickly locate their GUI and control surfaces to a selected track.
* Feet+Frames enhancement (HD, LE) -- Allows film customers to set their "zero feet+frames" point anywhere in the session, and, with multiple feet+frame rates, allows the feet+frames timeline to remain in sync with all workflow variations. (LE: requires DV Toolkit)
* Enhanced clip indication (HD) --Plug-in clipping is now displayed on the D-Control worksurface and on the GUI send labels for easy diagnosis of gain structure level problems while mixing. Plus, a new "clear clip" key command and a new "clip hold" preference provide additional display enhancements.
* Foley Record Mute (HD) -- Mutes the record input upon "stop" and prevents unwanted loud noises during foley record sessions.
* In addition to an enhanced feature set, Pro Tools 6.4 software provides exclusive support for three exciting new Digidesign products -- ICON with D-Control, Command|8, and AVoption|V10 (Avoption|V10 is only available for the Windows XP operating system. Apple Mac OS X support will be provided in a future release.)
* Automatic Delay Compensation (HD) -- Pro Tools now automatically compensates for inherent delay issues caused by plug-in latency, bussing, and routing within the Pro Tools mixer. It allows the user to take advantage of mixer configurations that were previously only possible with analog consoles, or with digital consoles many times the price of a Pro Tools environment.
* TrackPunch (HD) -- Allows Pro Tools to be used as a recorder on film stages, rather than only an editing/playback device. For music, TrackPunch enhances current QuickPunch capabilities for music recording by allowing the user to arm tracks on the fly. Operators can punch in and out of tracks by using individual track record buttons instead of one global command. Combined with TrackInput, TrackPunch allows workflows similar to traditional tape-based multi-track recorders.
* TrackInput (HD) -- Allows per-track switching between input source and playback from disk.
* 23.976 fps support (HD, LE with DV Toolkit option) -- Enables post customers who work with high-definition video to use a new frame rate specific to the medium, facilitating proper synchronization to the source. Pro Tools now offers complete recall of all editing, processing, mixing console, and machine control parameters while working entirely within the new 24 and 23.976 frame rates required for high-definition video production.
* +12 dB (over 0 dBfs) fader gain (HD, LE) -- Gives the user more latitude while mixing than with the previous +6 dB (over 0 dBfs); particularly useful when balancing recordings made at lower levels. With a new taper above 0 dB, the faders also have a more familiar "console" feel.
* RecordLock (HD) -- Loading audio with discontiguous ("broken") time code means that an assistant no longer has to continually re-arm Pro Tools when loading in different takes from film shoots. This also prevents missed record takes on shooting stages, where the distributed time code stops and starts between takes.
* Hierarchical plug-in menus, organized by plug-in category (HD, LE) -- Minimizes mousing and searching for the right plug-ins.
* Track Position Numbers (HD, LE) -- Gives each track a fixed sequential number, enabling operators to better organize their sessions, as well as to quickly locate their GUI and control surfaces to a selected track.
* Feet+Frames enhancement (HD, LE) -- Allows film customers to set their "zero feet+frames" point anywhere in the session, and, with multiple feet+frame rates, allows the feet+frames timeline to remain in sync with all workflow variations. (LE: requires DV Toolkit)
* Enhanced clip indication (HD) --Plug-in clipping is now displayed on the D-Control worksurface and on the GUI send labels for easy diagnosis of gain structure level problems while mixing. Plus, a new "clear clip" key command and a new "clip hold" preference provide additional display enhancements.
* Foley Record Mute (HD) -- Mutes the record input upon "stop" and prevents unwanted loud noises during foley record sessions.
* In addition to an enhanced feature set, Pro Tools 6.4 software provides exclusive support for three exciting new Digidesign products -- ICON with D-Control, Command|8, and AVoption|V10 (Avoption|V10 is only available for the Windows XP operating system. Apple Mac OS X support will be provided in a future release.)
à ce propos je n'ai pas tout saisi.* +12 dB (over 0 dBfs) fader gain (HD, LE) -- Gives the user more latitude while mixing than with the previous +6 dB (over 0 dBfs); particularly useful when balancing recordings made at lower levels. With a new taper above 0 dB, the faders also have a more familiar "console" feel.
d'accord pour l'edition à la souris.
outil trim et hop +12 db au lieu de 6
mais avec nos surfaces de controle?
allons nous etre obligé d'acheter un D-Control ?????
Non, juste deux Pro Control... Une pour l'habituel +6dB... L'autre pour le +6dB supplémentaire... Z'ont pensé à tout chez Digi... Trop fort. (-;
Sinon, le coup du Record enable enclenchable à la volée mais reservé au HD c'est vraiment cheap... On revient 2 ans en arrière, à l'époque où tout un tas de fonctions bien pratiques étaient reservées au TDM. Z'ont vraiment rien compris chez Digi... S'ils croient que c'est ça qui va convaincre les utilisateurs d'acheter du HD... Bande de nazes...
Sinon, le coup du Record enable enclenchable à la volée mais reservé au HD c'est vraiment cheap... On revient 2 ans en arrière, à l'époque où tout un tas de fonctions bien pratiques étaient reservées au TDM. Z'ont vraiment rien compris chez Digi... S'ils croient que c'est ça qui va convaincre les utilisateurs d'acheter du HD... Bande de nazes...
- Dorian
- Fondateur
- Messages : 14363
- Inscription : 17 juin 2003, 18:21
- Localisation : Clamart
- Contact :
Ca doit pas être grand chose de changer l'échelle en software... Enfin j'espère. Au pire tu colles une petite sérigraphie sur la pro control faites maison . Il va juste falloir y aller mollo sur le fader au delà de 0 .
Sinon moi aussi je suis vert de pas avoir le track punch et le track input sur la version LE... C'est trop pratique ce truc (cf. DP ou Nuendo).
Bye.
Sinon moi aussi je suis vert de pas avoir le track punch et le track input sur la version LE... C'est trop pratique ce truc (cf. DP ou Nuendo).
Bye.
ça fait deja quelque temps qu'ils sont à la traineAnonymous a écrit :cest naze, digi a juste mis des focntions qui esixtent depuis plus d'un an chez la concurence! super!
par exemple la digibase, ergonomie tres legerement empruntée à la bibliotheque de Nuendo 1.5
et ne parlons meme pas ici, d'une simple version cocoa de Pro Tools.
mais on s'en fout, Pro Tools on t'aime et tu nous le rend bien !