Si si y'a les nouveautés, mais écrites en noir sur fond noir
. Les voilà:
Recorder SX-R4 Firmware - V 2.7.2095 ( up dated November 5. 2008 )
- Added feature: MIRRORING on CF Card , the routing setting of the HD is replicated on the CF Card.
Important Note: this feature depends on CF Card performance. Actually it is barely possible to record up to 8 tracks at 192kHz, however a configuration of up to 8 tracks at 48kHz works seemlessly. The CF Card performance is monitored in real time and a warning will appears if the CF Card is too slow ( CF flashing on the screen ). In this case the recording is stopped on the CF Card but will continue on the Hard disk.
- Added auto power-down feature in the MISC Menu
- Added TAKE size [bytes] in browse files menu
- Warnings / Alarms display time has been reduced in order to keep normal display info more readable
- Fixed CF issue when access time is too slow: take could be corrupted
- Corrected DSP algorythm in the Monitoring , suppressing noises and hiss bug at low level signals
- Fixed various minor bugs
KNOWN ISSUE:
If a TAKE reaches the maximum capacity of a drive (HD or CF Card), the recording may not be stopped properly and the take can be lost. Make sure that your recording does not reach the maximum capacity of a drive
Voilà voilà.
Bye.
](./images/smilies/eusa_wall.gif "Brick wall"){kind=small}
